Montague 3501-7 Oven Thermostat Kit FDTH-1 3/16" X 14-3/4" Cap 54"
Specifications:
| Attribute | Details |
|---|---|
| [ Type - Fdth-1 Kit ] Temp 300-650 ] [ Bulb 3/16 X | |
| 14-3/4 ] [ Cap 54 ] [ Out 3/8 Fpt ] [ Includes Dial | |
| # 22-1011 300-650 ] | |
| Old Style Black Dial # 22-1202 300-650 | |
| Vulcan | |
| Heavy Duty Range/Oven Std. & Convection, "Lobster" | |
| Gh3/72, Gh3/72C, Gh3/72S, Gh30, Gh30C, Gh45, Gh45/72, Gh56, | |
| Gh56S, Gh6, Gh60, Gh60/45, Gh60/72, Gh6045C, Gh60T, | |
| Gh60T/45, Gh60T/72, Gh6C, Gh6S, Gh6T45C, Gh72, Gh72/45, | |
| Ghm3/72, Ghm30, Ghm30C, Ghm45, Ghm45/72, Ghm56, Ghm6, | |
| Ghm60,Ghm60/45, Ghm60/72, Ghm60T, Ghm60T/45, Ghm60T/72, | |
| Ghm72,Ghm72/45 |
Description
The Montague 3501-7 Thermostat Kit FDTH-1 is used to control the temperatures of ovens to maintain the right heat for cooking in the kitchen. It has a capillary of 3/16” x 14-3/4” with a length of 54” and is suitable for use with different models of Montague ovens. This thermostat regulates temperatures and adjusts them in case of any change to avoid overcooking or undercooking the food. It is easy to install and has a high level of reliability, it increases precision while cooking, increases equipment durability and prevents wastage of energy.
More Information:
- MONTAGUE:3501-7
Step1: Turn off power to the oven at the circuit breaker to ensure safety.
Step2: Remove the oven back panel to access the thermostat.
Step3: Disconnect the old thermostat wires carefully, noting their positions.
Step4: Install the new thermostat in the same location.
Step5: Reconnect wires to the corresponding terminals.
Step6: Replace the back panel and secure it with screws.
Step7: Restore power and test the oven to ensure proper temperature control.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
-
What maintenance is required for the Montague 3501-7 Thermostat Kit?
Clean the sensor probe and check that all screws are tight. Ensure proper positioning inside the oven cavity. Correct alignment ensures even baking temperatures throughout the oven chamber.
-
How do I install the Montague 3501-7 Thermostat Kit?
- Remove front or side panels to access the thermostat.
- Label and disconnect all wires from the old thermostat.
- Carefully remove the sensing bulb and capillary tube.
- Route and mount the new sensing bulb in the same path and bracket.
- Install the thermostat, reconnect wiring, and secure panels.
- Restore utilities and verify accurate temperature cycling.
-
What are common issues with the Montague 3501-7 Thermostat Kit?
- Oven overheats or underheats.
- Sensor probe becomes misaligned.
- Temperature fluctuates mid-cycle.
- Loose mounting affecting readings.
-
What operating limitations does the Montague 3501-7 Thermostat Kit have?
Thermostats in this Montague category typically control moderate to high cooking temperatures, depending on the oven or range model. Proper bulb placement is essential to maintain stable operation and prevent temperature swings.