Cres Cor 0848058K1 Temperature Sensor
C$ 1,391.80
Specifications:
| Attribute | Details |
|---|---|
| Temperature Sensor, Roast & Hold | |
| Crescor Co151Fwua12B, Co151Hwua6B, Co151X185B, Co151Xua5B, | |
| Co151Xwua5B, Ro151Fw1332B, Ro151Fwua18B |
Description
The Cres Cor 0848058K1 Temperature Sensor is an element that is meant to measure the internal system in compatible equipment. It measures the temperature changes in the cabinet and transmits measured values to the control system to allow the appliance to vary the amount of heat it delivers to the cabinet to keep setpoint conditions. It is applicable in commercial foodservice like restaurants and catering facilities where there is a need to maintain constant holding temperatures in food. It operates thermostats, control boards and heating elements. The temperature assists in proper temperature control and operating within the service of the entire system.
More Information:
- CRES COR:0848 058 K1 ,0848-058-K1 ,0848058K1 ,CRE0848058K1
Step1: Disconnect power to the unit and check for zero voltage for safety.
Step2: Remove the access panel and locate the original sensor.
Step3: Unplug and detach the old sensor carefully.
Step4: Install the new sensor in the same mounting position and secure firmly.
Step5: Reconnect wiring as per original configuration.
Step6: Restore power and test temperature readings for accuracy.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
Thank you! Your review has been submitted.
-
What maintenance is required for the Cres Cor 0848058K1 Temperature Sensor?
Inspect the sensor regularly for dust, grease, or corrosion buildup and clean gently with a soft cloth. Ensure wiring connections remain tight and undamaged to maintain accurate readings. Routine calibration checks support ensuring consistent temperature performance.
-
What are common issues with the Cres Cor 0848058K1 Temperature Sensor?
- Intermittent signal loss from loose wiring.
- Corrosion on probe affecting responsiveness.
- Complete sensor failure causing no output.
- Open circuit in probe assembly leading to erratic output.