Cma Dishmachines 00411.00 Micro Switch

SKU: 00411.00 Brand:
CMA Dishmachines
Availability:
In Stock
(0)
C$ 20.63
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
15A-125/250/277Vac, (3) 3/16" Tab Terminals
Cma Ah, B, C, C3/D, Cb, Cma-(44, 66, 180Uc), Eah, Ec,
Est-Ah, Gl-X, L-1X(16), S-(Ah, B, C)

Description

The CMA Dishmachines 00411.00 Micro Switch is an electrical control component that is compatible with the other commercial equipment. It is an on/off or limit-activation switch in the dishwasher, which senses the location of doors, panels or internal mechanisms to manage operation more properly. This is mostly in restaurants and cafeterias where commercial systems are operating. It provides adequate sequencing and interlocking as it informs the machine when an element is in place. The micro switch is essential in ensuring that the appliances are operated correctly and to avoid unnecessary activity when using the appliances.

More Information:

  • CMA DISHMACHINES:00411.00 ,411

Step1: Turn off and disconnect power to the dishwasher before servicing.

Step2: Open the control panel or access cover to locate the faulty micro switch.

Step3: Label and disconnect the attached wires carefully.

Step4: Remove the mounting screws or clips holding the old switch.

Step5: Install the new micro switch in the same position and reconnect wires securely.

Step6: Reassemble the panel, restore power, and test switch operation for proper response and safety.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the CMA Dishmachines 00411.00 Micro Switch?

    Keep the micro switch clean and free of grease or moisture to prevent contact failure. Inspect wiring and terminals regularly for corrosion or looseness. Ensure proper alignment of the actuator during operation to avoid misfiring.

  • What are common issues with the CMA Dishmachines 00411.00 Micro Switch?

    • Intermittent switching due to worn or pitted contacts.
    • Moisture ingress causing short circuit or failure.
    • Misaligned actuator preventing proper activation.
    • Corroded or loose wiring terminals leading to connectivity issues.
    • Complete failure to trigger circuit output.