TRUE 872025 Adjustable Stud Mount Leg W/6" Height 2000 LB Capacity

SKU: 872025 Brand:
TRUE
Availability:
In Stock
(0)
C$ 879.08 Price reduced from C$ 1,225.55
Save C$ 346.47
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Adjustable Equipment Leg
1/2"-13 Stud, 6" Leg With 1-1/4" Adj, Hex Foot, Die Cast,
Nickel, 2000 Lbs Per Leg, 2-3/8" Top Dia.
Montague Uf, Ufr, Ufs, Ufsr, Ufscr 12/15/98 To Current.
136 Series, G16, G26 (All Models 12/15/98 To Current Only)
True 872025 Is For A Set Of 4. Ap Sells Each - Must Order 4
To Equal True 872025

Description

The TRUE 872025 Adjustable Stud Mount Leg with a 6-inch height can be used as a support and leveling material which is supposed to give a stable height to equipment with a load of up to 2000 lb. It works with a threaded stud, which precisely adjusts the height in order to fit an uneven floor surface. This leg is mounted on the lower part of compatible units where positioning and clearance have to be controlled. It assists in the even distribution of weight, better alignment, and safe operation in the normal operation, maintenance, and cleaning process in commercial facilities.

More Information:

  • TRUE:830409 ,872025 ,TRUE830409 ,TRUE872025

Step1: Ensure the appliance is powered off for safety.

Step2: Remove any existing leg or obstruction at the mounting point.

Step3: Insert the new adjustable stud mount leg into the threaded hole.

Step4: Adjust the leg to the desired height and tighten securely with included hardware.

Step5: Verify the leg is level and firmly attached.

Step6: Test appliance stability before regular use.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the TRUE 872025 Leg?

    Periodically check the leg for wobbling or uneven contact with the floor. Tighten any loose mounting bolts and wipe down surfaces to prevent dirt buildup. Make sure the height adjustment threads move freely and operate smoothly.

  • What are common issues with the TRUE 872025 Leg?

    • Mounting bolts loosening over time.
    • Difficulty adjusting height due to debris in threads.
    • Uneven support causing equipment wobble.
    • Surface corrosion on threaded areas.