Roundup - AJ Roundup - AJ Antunes 7000207 Vertical Toaster Conveyor Sprocket 28 Tooth 3/8" ID X 2-3/8" OD

SKU: 7000207 Brand:
Roundup - AJ Antunes
Availability:
In Stock
(0)
C$ 55.48
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Conveyor Sprocket, 3/8" Id X 2-3/8" Od, 28 Tooth, Slot Set
Screw.
Roundup Toaster Vct-1000, Vct-1000Sonic, Vct-20, Vct-20Bk,
Vct-20 Deluxe, Vct-20 Deluxe With Heated Base, Vct-200,
Vct-2000, Vct-2000 Wide Mouth, Vct-2000Sonic, Vct-20Cv,
Vct-25, Vct-250, Vct-50

Description

The AJ Roundup - AJ Antunes 7000207 Conveyor Sprocket 28 tooth 3/8" ID 238 OD is a spare part that is used in the vertical toasters. This sprocket is forced to move with the conveyor chain to relay motion on the drive assembly to the toaster as the product runs through it. It is attached to the conveyor drive shaft of a toaster and interlaces with other chain links to ensure the correct travel and alignment. The toaster in the foodservice conditions has a sprocket that provides a steady flow of the conveyor, contributing to stable throughput and performance of the toaster.

More Information:

  • FRANKLIN CHEF:490378||ROUNDUP:2150108 ,2150190 ,215K111 ,7000207

Step1: Turn off power to the conveyor system before starting.

Step2: Remove any guards or covers to access the old sprocket.

Step3: Loosen the mounting bolts and carefully remove the old sprocket.

Step4: Position the new sprocket on the shaft, aligning it with the chain.

Step5: Tighten mounting bolts securely and check chain alignment.

Step6: Replace guards or covers and restore power.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Roundup - AJ Antunes 7000207 Conveyor Sprocket?

    Inspect for wear on teeth and alignment on the conveyor. Lubricate bearings if applicable and ensure the sprocket rotates freely.

  • What are the common issues with the Roundup - AJ Antunes 7000207 Conveyor Sprocket?

    • Teeth wear causing chain slippage.
    • Misalignment affecting conveyor movement.
    • Rust or corrosion on metal surfaces.
    • Sprocket seizing due to debris buildup.