Pitco PP11001 Fryer Natural Gas Bleed Gas Actuator 3/4" FPT 300,000 BTU

SKU: PP11001 Brand:
Pitco
Availability:
Out of Stock
(0)
C$ 389.25 Price reduced from C$ 542.66
Save C$ 153.41
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
[ Nat Gas ] [ Size 3/4" Fpt ] [ Nat Safety ][ 3.5"Wc ]
[Bleed Gas Actuator] [ Width 4"] [ Brand Rsw ]
1/4" Cct Pilot Out Only, W/Slotted Thermocouple Magnet
3/4 X 1/2" Reducer Bushings, Model 7000 7000 Bgor-S7B
Bleed Gas Ports 1/4" Cct, 300,000 Btu
Use Coaxial Thermocouple
For Lp Gas Valve Use # 54-1000
Southbend

Description

The Pitco PP11001 Fryer Natural Gas Bleed Gas Actuator is an essential part used to control the flow of the gas. This has a 3/4” FPT size and 300,000 BTU capacity to control the flow of gas during frying to enhance efficiency. This actuator improves safety by preventing gas leakage and ensuring constant heating which is essential when obtaining the finest frying outcomes. It can be considered an vital piece of equipment for any industrial kitchen because of its construction and versatility, which makes it suitable for most of the fryer models, assured to strike productivity into the food preparation services.

More Information:

  • ANETS:ANEP8903-39 ,P8903-39 ,P8904-65 ,PP11001||GARLAND:1587700 ,4520452 ,GL1587700||MAGIKITCH'N:PP11001||PITCO:P8903-39 ,P8904-65 ,PP11001||SOUTHBEND:1053999||U-LINE:313-541-018 ,700-802 ,700-804

Step1: Shut off the gas supply and disconnect electrical power before servicing.

Step2: Access the gas valve assembly and locate the existing bleed gas actuator.

Step3: Disconnect all gas lines and wiring connected to the old actuator.

Step4: Remove the old actuator and clean the mounting surface.

Step5: Install the new bleed gas actuator and reconnect all connections securely.

Step6: Restore gas and power, then test for proper operation and check for leaks.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Pitco PP11001 Gas Actuator?

    Regularly inspect the actuator for dirt, grease, or corrosion. Ensure the linkage moves freely and mounting hardware is secure to maintain proper gas valve operation.

  • How do I install the Pitco PP11001 Gas Actuator?

    • Turn off the gas supply and power to the unit.
    • Remove the old actuator and disconnect any linkages or wiring.
    • Mount the Gas Actuator in the original location.
    • Reconnect all linkages and wiring according to the original configuration.
    • Secure the actuator with mounting screws or bolts.
    • Restore gas supply and power, then test the unit to ensure the actuator properly controls the gas valve.

  • What are common issues with the Pitco PP11001 Gas Actuator?

    Common problems include sticking or misaligned linkages, failure to actuate the gas valve, and corrosion or wear that hinders smooth operation, causing burner or ignition issues.

  • Which Pitco models are compatible with the Pitco PP11001 Gas Actuator?

    This actuator is compatible with Pitco Gas Fryer, including model SLG40.

  • What maintenance is required for the Pitco PP11001 Bleed Gas Actuator?

    Inspect the fryer gas actuator regularly for proper operation and secure mounting to ensure better gas flow control. Check for gas leaks at the connections using approved leak-detection methods. Clean external components to prevent grease buildup in fryer condition. Verify smooth actuator response during scheduled system testing to maintain better performance.

  • What are common issues with the Pitco PP11001 Bleed Gas Actuator?

    • Fryer gas leakage at threaded FPT connections.
    • Actuator sticking or failing to open/close properly.
    • Inconsistent gas flow is affecting fryer performance.
    • Damage to internal seals is causing pressure irregularities.