BKI (Barbeque King) M0047 Fryer Motor/Pump Assmbly 115V/230V 1/3 HP 1Ph 1425/1725 RPM 1/2" FPT

SKU: M0047 Availability:
In Stock
(0)
C$ 1,230.61 Price reduced from C$ 2,144.55
Save C$ 913.94
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Motor/Pump Assmbly, [ 115V/230V, ] [ 1/3 Hp, ] [1Ph ]
[1425/1725 RPM ] [ 1/2" Fpt ] [ 3" X 5" Mount Centers ]
Includes Pump Seal # 32-1606
Pump Only A3834, B-229, # 262816
Motor Only Mb-137, # 681257
Wiring Diagram Located On Inside Of Rear Cover
Bk Industries Fryer
Dean Fryer Mf-90/65, Mf-90A/65, Mf-90/(80,110,126,160,172)
Mf-90A/(80,110,126,160,172), Series 2424.&
Mf-90U/80Bk With S/N Ending With Hc Or Hch,
Mf-90-Bi(12,14,18,20).
Decathalon Series (D20,D50,D60,D80)Super Cascade Filter
Systems
Pitco Fryer Filter 18-2Wks, Ag14, Ag14S, F14Rs (1985 &
Later), Sf50, E12, E14, E14B, E14X, E18, E18B, E7, E7B,

Description

The BKI (Barbeque King) M0047 Motor/Pump Assembly operates efficiently in fryers. The assembly operates using a 1/3 HP motor which runs at 1425/1725 RPM while supporting both 115V and 230V voltage settings. Secure installation becomes possible through its 1/2" FPT connection and 3" x 5" mount centers. The assembly integrates the pump seal #32-1606 while offering compatibility with multiple fryer models to improve oil filtration performance. The equipment delivers multiple advantages which enhance fryer performance and extends part life and simplifies maintenance tasks to achieve steady frying outcomes.

More Information:

  • BK INDUSTRIES:AN2310010S ,BKIAN2310010S ,M0047||BROASTER:10800||DEAN:1726||FRYMASTER:1726 ,FM1726||PITCO:PP10101 ,PTPP10101

Step1: Turn off gas and disconnect the electrical power to the fryer.

Step2: Drain oil or water from the fryer to prevent spills.

Step3: Remove the old motor/pump assembly by disconnecting mounting hardware.

Step4: Install the new motor/pump assembly, reconnect piping, and secure all fasteners.

Step5: Restore power and test the pump operation to ensure proper circulation.

Customer Reviews

No reviews yet. Be the first to write one!

  • What Maintenance is required for the BKI M0047 Motor/Pump Assembly?

    The Motor/Pump Assembly should have the pump strainer cleaned regularly to prevent flow restriction and inspect the motor strapping and wiring monthly for tightness and insulation damage.

  • How do I install the BKI M0047 Motor/Pump Assembly?

    • Shut off power and disconnect oil/fryer fluid supply, allowing the system to cool.
    • Remove the old motor/pump unit by disconnecting wiring and unbolting the mounting.
    • Clean the mounting surface, remove old seal residue, and ensure alignment for new unit.
    • Install the new assembly, secure the mounting bolts, connect oil/fryer lines to the ½" FPT ports, and hook up the wiring per diagram.
    • Restore power and fluid supply, run a start-up cycle, check for proper flow, absence of leaks around the seal, and stable motor operation.

  • What are common issues with the BKI M0047 Motor/Pump Assembly?

    Typical failures include clogged inlet or strainer reducing flow, motor overheating or failing due to blocked discharge, and leaks caused by worn pump seal.

  • What are the operating limitations for the BKI M0047 Motor/Pump Assembly?

    It is rated for 1/3 HP, single-phase motor operation at 115/230V, 50/60 Hz, with 1/2″ FPT port connections, 3″×5″ mount centers, and RPM options of 1425/1725.

  • What maintenance is required for the BKI (Barbeque King) M0047 Motor/Pump Assembly?

    Regularly inspect the motor and pump for grease buildup, debris, or leaks. Clean and lubricate moving parts as recommended. Proper maintenance ensures consistent oil circulation and safe operation. Always disconnect power before servicing the unit.

  • What are common issues with the BKI (Barbeque King) M0047 Motor/Pump Assembly?

    • Reduced oil flow or pump pressure.
    • Unusual humming or vibration from the motor.
    • Leaks at fittings or seals.
    • Overheating during extended operation.