TRUE E801810 Defrost Heater 123-7/8" 950W 115V
C$ 628.18
Price reduced from
C$ 875.77
Specifications:
| Attribute | Details |
|---|---|
| Defrost Heater | |
| 123-7/8", With (2) Wire Leads | |
| True |
Description
The TRUE E801810 Defrost Heater is a 950-watt electric heating unit that can be used in compatible commercial units. This heater is 123-7/8 inches in size and it is used to warm the evaporator coil when the automatic defrost cycles are on to eliminate frost and ice that may have accumulated and obstruct the cooling process. It is applied in grocery and convenience and foodservice. Attached the evaporator assembly; the defrost heater is linked to the sensors of the system to activate defrost. It is also essential in the system to ensure that there is a heat exchange and constant temperature control when the system is in service.
More Information:
Step1: Disconnect power and ensure freezer is fully defrosted and empty.
Step2: Remove the evaporator cover to access the old heater.
Step3: Carefully detach mounting clips and disconnect wire leads.
Step4: Position new heater along evaporator coil in original routing.
Step5: Secure clips evenly to avoid contact with fins or tubing.
Step6: Reconnect wiring firmly and replace cover panel.
Step7: Restore power and check proper defrost cycle operation.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
Thank you! Your review has been submitted.
-
What maintenance is required for the TRUE E801810 Defrost Heater?
Inspect and test the heater element periodically for continuity and signs of burn damage. Keep connections tight and free from corrosion, and ensure insulation is intact. Remove ice buildup and always disconnect power before servicing.
-
What are common issues with the TRUE E801810 Defrost Heater?
- Heater element failure or uneven heating.
- Wiring/connector damage causing intermittent operation.
- Frost buildup reducing defrost efficiency.
- Short circuit or electrical overload issues.