Bunn BU01082.0002 Sprayhead Hole 6 Hole Size 098

SKU: BU01082.0002 Brand:
Bunn
Availability:
In Stock
(0)
C$ 5.88
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Material Stainless Steel
Inner Diameter 3/8" | 10 mm
Outer Diameter 1 1/2" | 38 mm
Type 6-Hole Pattern
Depth 3/8" | 10 mm

Description

The Bunn BU01082.0002 Sprayhead is a water distribution element used in a commercial equipment. It has six-sized holes that evenly spread hot water over ground coffee in the brew cycle. This is mounted in makers as a component of the brewing system and has a direct influence on the consistency of extraction. When used, it will provide consistent saturation of coffee grounds which will allow consistent brew performance over repeated cycles. During maintenance, the sprayhead is usually washed or changed to avoid mineral accumulation that may interfere with the flow of water and the performance of brewing.

More Information:

  • BUNN-O-MATIC:01082-0002 ,01082.0002 ,1082-0002 ,1082.0001999999999 ,6-098-0002 ,BU01082-0002 ,BU01082.0002 ,BU1082-0002 ,BU6-098-0002

Step1: Turn off and unplug the coffee machine allow it to cool completely.

Step2: Locate and remove the existing sprayhead by unscrewing it counterclockwise.

Step3: Clean the sprayhead area to remove residue or buildup.

Step4: Align and screw in the new sprayhead clockwise until snug avoid overtightening.

Step5: Restore power and run a test brew cycle.

Step6: Check for leaks and ensure even water distribution.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Bunn BU01082.0002 Sprayhead?

    Regularly remove and clean the sprayhead to prevent mineral deposits from blocking holes. Soak in descaling solution when buildup occurs. Ensure proper alignment after reinstallation to maintain even water distribution during brewing.

  • What are common issues with the Bunn BU01082.0002 Sprayhead?

    • Uneven water spray pattern.
    • Clogging from mineral deposits.
    • Reduced brewing efficiency.
    • Dripping or misalignment after installation.