Southbend B93-00008 Oven Flame Sensor 90°

SKU: B93-00008 Brand:
Southbend
Availability:
In Stock
(0)
C$ 151.40 Price reduced from C$ 249.24
Save C$ 97.84
Have a Question? +1 (866) 863-0907 / (630) 326-8602

Specifications:

Attribute Details
Null

Description

The Southbend B93-00008 Oven Flame Sensor is safe monitoring system that is compatible. It is placed at 90 degrees and it senses the existence of a flame signals the control system to control the flow of gas. It is fit in the burner assembly to avoid unsafe conditions by turning off gas when the flame is not present. This sensor is usually changed when the performance is less or the unit cannot recognize a flame correctly. It ensures that it operates safely provide stable ignition and encourages accurate system operation in commercial kitchens by making sure that it detects the flame accurately.

More Information:

  • MIDDLEBY MARSHALL:1175127||SOUTHBEND:1175127 ,1189311 ,1195448 ,B93-00008 ,B93-00020 ,SOU1175127 ,SOU1189311 ,SOU1195448

Step1: Turn off power and gas supply before starting.

Step2: Remove old flame sensor from burner assembly carefully.

Step3: Align sensor with mounting bracket.

Step4: Secure sensor using original screws tightly.

Step5: Reconnect wiring ensuring correct polarity.

Step6: Restore power and test ignition for safe flame detection.

Step7: Inspect wiring insulation for damage before reassembly.

Step8: Allow system to run and confirm stable flame signal operation.

Step9: Shut down if flame is not detected and recheck alignment.

Customer Reviews

No reviews yet. Be the first to write one!

  • What maintenance is required for the Southbend B93-00008 Flame Sensor?

    Inspect and clean flame sensor rod regularly to remove carbon buildup affecting flame detection accuracy. Check wiring connections for corrosion or looseness, ensure proper alignment with burner flame, and test operation during routine inspections for stable performance and safety.

  • What are common issues with the Southbend B93-00008 Flame Sensor?

    • Dirty or carbon-fouled sensor causing weak flame detection.
    • Intermittent shutdown due to poor signal strength.
    • Wiring corrosion or loose connections leading to signal loss.
    • Misalignment with burner flame causing ignition failure.