Hobart 00-274227-4 Cork Gaskets W/4 - 5/16" Holes 5-1/4" OD x 3-7/8" ID
C$ 13.08
Specifications:
| Attribute | Details |
|---|---|
| Cork Gasket, 5-1/4" Dia Od X 3-7/8" Dia Id, | |
| 4Ea 5/16" Holes | |
| Hobart Dishwasher C44A |
Description
The Hobart 00-274227-4 Cork Gaskets W/4 - 5/16" Holes 5-1/4" OD x 3-7/8" ID is a component of the system that is meant to work by sealing the junction points in dishwasher systems. It helps in correct containment in that it keeps a steady seal in the right conditions. These gaskets are vital to stabilizing the functioning of the systems in active cycles. The component is widely applicable in commercial dishwashing applications and links with internal assemblies to facilitate controlled performance. It is installed as part of service procedures and assists in limiting the damage that may be caused by leakage or misalignment.
More Information:
- HOBART:00-274227-00004 ,00-274227-4 ,274227-4
Step1: Turn off dishwasher and disconnect power and water supply for safety.
Step2: Remove old gasket and clean sealing surface thoroughly.
Step3: Align new gasket over port, ensuring holes match fittings.
Step4: Press evenly into place without twisting or tearing carefully.
Step5: Reconnect water supply, restore power, and check for leaks during test cycle before use.
Customer Reviews
No reviews yet. Be the first to write one!
Write a Review
Thank you! Your review has been submitted.
-
What maintenance is required for the Hobart 00-274227-4 Gasket?
Inspect the dishwasher gasket for drying, cracking, or compression damage. Keep the sealing surface clean and dry when possible. Ensure proper sealing and prevent water or steam leaks.
-
What are common issues with the Hobart 00-274227-4 Gasket?
- Cracking due to heat and moisture cycles.
- Loss of sealing ability from compression wear.
- Water leakage around gasket edges.
- Improper fit causing pressure loss.